פרוייקטים מדחסים

Beeri Print - New compressed air system installation

The company had an old compressed air system with a mediocre performance level, calibrated somewhat out of harmony with plant needs; hence, its energy consumption was significantly higher than what could normally be expected using a better technology.

Keter group

Merkavim Transportation Technologies

Polysack Flexible Packaging

Packaging Products - Yamaton

After installation and a sample calculation, we reached the conclusion that the customer ....

Olympia

After upgrading from a 60 hp (45 kW) fixed speed compressor to a 50 hp (37 kW) model ELCD50INV with permanent magnet ...

ICC Israel

After completing installation and performing several measurements, as can be...

Bar Bakfar

After installing the systems, it can be seen that the air system works in an optimal way, saving the customer an average of about 10 kW per hour, despite the fact that the customer increased air flow rates. This savings was achieved ...

Carpantry plant - Gal kitchens

By upgrading his air supply system, the customer increased efficiency by 50 to 60 percent in terms....

Blueran

After characterizing and installing the compressor room, we performed operation and full calibration of the air system and compressors, to achieve proper, continuous operation with no disturbances, while obtaining ...

R.benes

Marvell

TDK

EL-AV Compressors

Every large project begins with one small calculation.

We at EL-AV Compressors Ltd Group believe that good solutions require prior thought and thorough, meticulous planning. When we set out to perform a project that is not of standard characteristics, we tap our best people in order to think, form a concept, characterize needs and constraints, design systems and plan production stages, until delivery of the project as a turnkey system.

Compressors projects